Work Procedure

SAVING VEHICLE SPECIFICATION (BCM)
With CONSULT
1. Select "Re/programming, Configuration".
2. Select the operation according to the CONSULT screen.
3. Perform "Before ECU Replacement" of "Vehicle Configuration" to write vehicle specification.
NOTE: If "Before ECU Replacement" of "Vehicle Configuration" cannot be used, use the "Manual Configuration" after replacing BCM. Refer to Description .

>>

GO TO 2

.
REPLACE BCM
Replace BCM. Refer to Removal and Installation .

>>

GO TO 3

.
WRITING VEHICLE SPECIFICATION (BCM)
With CONSULT Select "Re/programming, Configuration". Refer to Description .

>>

GO TO 4

.
INITIALIZATION AND REREGISTRATION OF ALL KEYS
Perform initialization and reregistration of all keys: Refer to CONSULT Immobilizer mode and follow the on-screen instructions.

NOTE: If customer has Virtual I-Key application, reprogram and register it as a third keyfob, and follow same configuration as vehicle Intelligent Key.

>>

WORK END