lemon-mirror:
Home >> Oldsmobile >> 1993 >> Ninety-Eight Regency >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry System >> Programming >> Transmitter & RAC Programming

Transmitter & RAC Programming

NOTE: Following procedure must be performed when replacing RAC module or either transmitter.
  1. Turn ignition switch to OFF position. Use a fused jumper wire and connect Data Link Connector (DLC) terminals "G" (Purple/White wire) and "A" (Black/White wire). Door locks, fuel door and trunk lid release should activate in approximately 2 seconds.
  2. Press any button on one transmitter. Door locks, fuel door and trunk lid release should activate in approximately 2 seconds. First transmitter is now programmed. Repeat this step using other transmitter. If only one transmitter is being used, disconnect jumper wire from DLC.
· About lemon-mirror