lemon-mirror:
Home >> Oldsmobile >> 2001 >> Intrigue GLS >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Modules >> Removal & Installation >> Electronic Brake Control Module >> Removal

Electronic Brake Control Module: Removal

  1. Electronic Brake Control Module (EBCM) is mounted on left side strut tower in engine compartment. Disconnect negative battery cable. Turn ignition switch to OFF position. Pull out lock tab from EBCM harness connector and disconnect connector. Disconnect pump motor connector from bottom of EBCM.
  2. Remove and discard EBCM-to-Brake Pressure Modulator Valve (BPMV) screws. Using care so as not to damage seal and solenoid valves, pull EBCM and separate from BPMV. Note location and position of wave spring(s) between EBCM and BPMV. Remove and discard wave spring(s).
· About lemon-mirror