Trouble Shooting
NOTE:
For information not covered in this article, see TROUBLE SHOOTING article in GENERAL INFORMATION.
Note condition and operation of SECURITY indicator light. If indicator stays on or flashes continuously, repair anti-theft system as necessary. See ANTI-THEFT SYSTEMS - INTRIGUE article in ACCESSORIES & EQUIPMENT. Check starter solenoid terminals and battery grounds. Check for proper installation of aftermarket electronic equipment. Check IGN 1 (30-amp) fuse, IGN 2 (50-amp) fuse and CRANK (40-amp) fuse located in underhood junction block. Check CRANK SIGNAL, BCM, CLUSTER (10-amp) fuse and PCM, BCM, U/H RELAY (10-amp) fuse located in instrument panel fuse block. Check for correct starter usage. See Fig 1 . If problem is found, repair as necessary. If problem is not found, perform self-diagnosis. See SELF-DIAGNOSTIC SYSTEM .