Engine Controls - Specifications - 3.8L: Capacities

BATTERY SPECIFICATIONS

Load Test (Amps)

⁽¹⁾ CC Rating @ 0°F (Amps)

⁽²⁾ Reserve Capacity Rating (Min.)

200

500

110

250-300

600

120

315

685

125

375

750

125

405

810

133

⁽¹⁾	Cold Cranking (CC) rating is current a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2 volts or greater at specified temperature.

⁽²⁾	Reserve capacity rating is length of time a battery can deliver 25 amps and maintain a minimum terminal voltage of 10.5 volts at 80°F (27°C).

FLUID CAPACITIES (AWD & FWD)

Application

Specification

Automatic Transaxle ⁽¹⁾

Estimated Service Refill

4.0 Qts. (3.8L)

Overhaul Refill (Includes Torque Converter)

9.1 Qts. (8.6L)

Cooling System (Includes Recovery Tank) ⁽²⁾

11.0 Qts. (10.6L)

Crankcase (Includes Filter)

4.5 Qts. (4.3L)

Drive Line Module (AWD) ⁽³⁾

2 Qts. (1.9L)

Overrunning Clutch (AWD) ⁽¹⁾

12 Ozs. (0.35L)

Power Steering Fluid ⁽⁴⁾

1.7 Pts. (0.8L)

Power Transfer Unit (AWD) ⁽³⁾

1.2 Qts. (1.2L)

⁽¹⁾	Mopar ATF Plus type 7176 recommended. If not available, use Mopar Dexron II ATF.

⁽²⁾	Add 3 quarts if equipped with rear heater.

⁽³⁾	Use Mopar gear lube SAE 85W-90 or equivalent.

⁽⁴⁾	Use only Mopar power steering fluid or equivalent. DO NOT use any type of automatic transmission fluid.