Bleeding Brake System: Notes

NOTE: During bleeding procedure, ensure fluid level remains close to full. Check fluid level periodically while bleeding system. Add DOT 3 brake fluid as required.

Allied Signal/Bendix ABX-4 ABS must be bled as 2 independent braking systems. Always bleed base brake system using manual bleeding or pressure bleeding procedure before bleeding Hydraulic Control Unit (HCU). See BLEEDING PROCEDURES . HCU must be bled separately. See BLEEDING HYDRAULIC CONTROL UNIT (HCU) . Bleeding HCU requires Chrysler's Diagnostic Readout Box (DRB-III) scan tool. Always repeat base system bleeding procedure after bleeding HCU.