Programming RKE Module
- Using a functional key fob transmitter, unlock vehicle and disarm Vehicle Theft Security System. Insert ignition key into ignition switch. Turn ignition switch to RUN position without starting engine. Using a functional key fob transmitter, press and hold UNLOCK button for a minimum four seconds (maximum ten seconds). While holding UNLOCK button, and before ten seconds passes, press and release PANIC button. A single chime will sound to verify that RKE module is set to receive new Vehicle Access Code(s).
- Within 30 seconds of chime, press any button on each new key fete transmitter. After 30 seconds or when ignition switch is turned OFF, RKE module will end programming mode. A single chime will sound to verify that RKE module will no longer receive additional Vehicle Access Code(s). When Vehicle Access Code(s) programming is complete, turn Ignition Switch to OFF position and verify RKE system operation using each key fob.