lemon-mirror:
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1390 (Cruise Control System) >> Repair Instructions >> Cruise Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cruise control cable from the module. Refer to Cruise Control Cable Replacement .
    Fig 1: Removing Cruise Control Cable
    G01721924Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector.
    Fig 2: Disconnecting Cruise Control Module Electrical Connector
    G01721925Courtesy of GENERAL MOTORS CORP.
  3. Remove the mounting bracket bolt from the cruise control module.
  4. Remove the cruise control module from the mounting bracket.
    Fig 3: Removing Cruise Control Module, Mounting Bracket And Bolts
    G01721926Courtesy of GENERAL MOTORS CORP.