lemon-mirror:
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1428 (Anti-Lock Brake System) >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors.
  2. Push in on the switch bank in order to install the switch bank.
    Fig 1: Connecting Electrical Connectors
    G01747240Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the bolts/screws to the switch bank to instrument panel.

    Tighten 

    Tighten the bolts/screws to 2.5 N.m (22 lb in).

    Fig 2: Installing Switch Bank & Screws
    G01747241Courtesy of GENERAL MOTORS CORP.
  4. Install the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (AZTEK) .
    Fig 3: Installing Instrument Panel Accessory Trim Plate
    G01747242Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror