lemon-mirror:
Home >> Pontiac >> 2002 >> Aztek FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 532 (Anti-Lock Brake System) >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the traction control switch.
  2. Connect the electrical connectors to the heater seat switches.
  3. Position the traction control/heated seat switch to the front floor console trim plate.
  4. Install the traction control/heated seat switch into the console trim plate pressing in until the retainers are fully seated.
Fig 1: Traction Control/Heated Seat Switch Electrical Connectors
G01721012Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror