lemon-mirror:
Home >> Pontiac >> 2002 >> Aztek FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 689 (Body Control System) >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the BCM connectors to the BCM.
  2. Install the BCM module (2).
  3. Install the right sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT -- RIGHT
  4. Program the BCM. Refer to Body Control Module (BCM) Programming/RPO Configuration .
    Fig 1: Installing Body Control Module
    G01779824Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror