Rectifier Test
WARNING: This page is about a different car, the 2002 Chevrolet Prizm. However, it is still accessible from the selected car via links, so may be relevant.
- Using an ohmmeter, measure resistance between positive terminal and each rectifier terminal. Perform STEP 1 in figure. See Fig 1 . Check resistance in both directions by reversing ohmmeter leads. Resistance should be more than 5 ohms in one direction and less than 5 ohms in the other direction. If resistance is not as specified, replace rectifier.
- Using an ohmmeter, measure resistance between each rectifier terminal and negative rectifier terminal. Perform STEP 2 in figure. See Fig 1 . Check resistance in both directions by reversing ohmmeter leads. Resistance should be more than 5 ohms in one direction and less than 5 ohms in the other direction. If resistance is not as specified, replace rectifier.