lemon-mirror:
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L >> Repair Instructions >> Boost Control Solenoid Replacement >> Installation Procedure

Installation Procedure

  1. Install the boost control solenoid (4).
    2. Fig 1: View Of Boost Control Solenoid
    GM911076Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the boost control solenoid nut (1).

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Connect the boost control solenoid electrical connector.
  4. Connect the boost source signal hose (3) to the boost control solenoid (4).
  5. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
· About lemon-mirror