lemon-mirror:
Home >> Pontiac >> 2004 >> Vibe Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Socket >> Repair Instructions >> AC/DC Power Outlet Control Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: AC/DC Power Outlet Control Module & Bolts
    GM852193Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
  2. Move the drivers seat to the full rearward position.
  3. Remove the 2 bolts (1).
  4. Fold the floor carpet to the inside.
  5. Disconnect the electrical connector (2).
  6. Remove the accessory AC/DC power control module (3) from the vehicle.
· About lemon-mirror