lemon-mirror:
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Entertainment System) >> Repair Instructions >> Antenna Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: Two similar modules were used in 2004. Refer to the parts catalog for the correct replacement.
  1. Remove the upper trim panel from the left rear quarter. Refer to Trim Panel Replacement - Rear Quarter Upper (Impala) or Trim Panel Replacement - Rear Quarter Upper (Monte Carlo) in Interior Trim.
  2. Disconnect the antenna amplifier electrical connector and the antenna coaxial cable. The antenna coaxial cable uses a sliding snap-lock. Pull the lock in order to remove the antenna coaxial cable.
  3. Detach the black antenna leads from the glass. The upper lead is held to the body metal with a wiring clip. Carefully pry the clip out of the metal.
  4. Fig 1: Antenna Amplifier & Bolt
    GM1507201Courtesy of GENERAL MOTORS CORP.
  5. Remove the antenna amplifier bolt.
  6. Remove the antenna amplifier.
  7. Fig 2: Antenna Module
    GM443678Courtesy of GENERAL MOTORS CORP.