lemon-mirror:
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Floor Shift Control Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Transaxle Shift Cable
    GM1236459Courtesy of GENERAL MOTORS CORP.
  1. Remove the console trim plate. Refer to Trim Plate Replacement - Front Floor Console (Aztek) or Trim Plate Replacement - Front Floor Console (Rendezvous) in Instrument Panel, Gages and Console.
  2. Use a flat-bladed tool in order to remove the shift cable end from the shift control lever.
  3. Remove the shift control cable from the shift control.
  4. Remove the shift control wire harness from the shift control.
    5. Fig 2: Locating Shift Control Fasteners
    GM828251Courtesy of GENERAL MOTORS CORP.
  5. Remove the shift control fasteners.
  6. Remove the shift control.
· About lemon-mirror