lemon-mirror:
Home >> Pontiac >> 2005 >> Bonneville SLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Disconnect the 14-way connector from the ignition control module (ICM).
  3. Disconnect the spark plug wires from the coil assemblies. Before removing the wires, note the position of the wires.
    4. Fig 1: View Of Ignition Coil Module And Module Mounting Bracket
    GM12299Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws (1) that secure the coil assemblies to the ICM.
  5. Remove the coils (2) and the ICM (3) from the bracket.
· About lemon-mirror