lemon-mirror:
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BPP Sensor Calibration

BPP Sensor Calibration

IMPORTANT: If the BCM or the brake apply sensing system (BAS) sensor is replaced, a brake pedal position (BPP) sensor calibration must be performed.

Perform the BPP Sensor Calibration using a scan tool. Refer to Brake Pedal Position Sensor Calibration in Lighting Systems, for the BPP calibration procedure.

· About lemon-mirror