Installation Procedure

Fig 1: View Of Generator

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the generator front mounting bolts.
Tighten: Tighten the generator mounting bolts to 50 N.m (37 lb ft).

Fig 2: View Of Generator & Rear Bracket

Courtesy of GENERAL MOTORS CORP.

Install the generator rear mounting bolt (1) to the generator.
Tighten: Tighten the generator rear mounting bolt at the generator to 50 N.m (37 lb ft).

Fig 3: View Of Generator Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of Positive Cable From Generator

Courtesy of GENERAL MOTORS CORP.

Install the positive cable to the generator:
1. Install the positive cable to the stud.
2. Install the positive cable nut at the generator.
  Tighten: Tighten the positive cable nut at the generator to 15 N.m (11 lb ft).
3. Push the cap onto the generator stud.
Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering System.
Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .