lemon-mirror:
Home >> Pontiac >> 2006 >> GTO Automatic >> Repair and Diagnosis >> Electrical >> Component Locations >> Wiring Systems >> Repair Instructions >> Relay Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Relay & Wire Harness Connector
    GM791846Courtesy of GENERAL MOTORS CORP.
  1. Locate the relay. Refer to the Master Electrical Component List  to locate the relay in the vehicle.
  2. Remove any fasteners which hold the relay in place.
  3. Remove any connector position assurance (CPA) devices or secondary locks.
    4. IMPORTANT: Use care when removing a relay in a wiring harness when the relay is secured by fasteners or tape.
  4. Separate the relay (1) from the wire harness connector (2).
· About lemon-mirror