Installation Procedure
- Install the generator to the generator bracket.
- Install the generator bolts.
Tighten: Tighten the generator bolts to 50 N.m (37 lb ft).
- Install the drive belt. Refer to Drive Belt Replacement .
- Install the generator electrical connector.
- Install the generator B+ lead.
- Install the generator B+ terminal nut.
Tighten: Tighten the generator B+ terminal nut to 20 N.m (15 lb ft).
- Install the battery ground (negative) cable to the battery. Refer to Battery Negative Cable Disconnection and Connection .
NOTE:
Refer to Fastener Notice
.