Body Control Module Replacement

WARNING: This page is about a different car, the 2008 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Body Control Module Procedure Pull tear tape off the wiring harness prior to removing connectors. Disconnect the electrical connectors. Press on the tabs to release the body control module. After serviced use tie strap. If a replacement module is installed, program the module. Refer to Control Module References

Callout

Component Name

Body Control Module

Procedure

Pull tear tape off the wiring harness prior to removing connectors.
Disconnect the electrical connectors.
Press on the tabs to release the body control module.
After serviced use tie strap.
If a replacement module is installed, program the module. Refer to Control Module References