lemon-mirror:
Home >> Pontiac >> 2009 >> G6 Base, 2D Coupe >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 2.4L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Level Sensor & Electrical Connector
    GM1580741Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor (2) into the slots on the fuel pump module bowl.
  2. Secure the retaining tab on the sensor into the slot on the pump module bowl.
  3. Connect the fuel level sensor electrical connector (1) to the pump module cover.
  4. Install the fuel level sensor electrical connector to the molded-in tab on the pump module bowl.
  5. Install the fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement .
· About lemon-mirror