lemon-mirror:
Home >> Porsche >> 1991 >> 911 Turbo >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Wheel Alignment Specifications & Procedures >> Wheel Alignment Procedures >> Toe-In Adjustment

Toe-In Adjustment

  1. Clamp steering wheel in centered position. Loosen tie rod lock nuts and adjust front toe-in by adjusting tie rod end length until toe-in is set to specification.
  2. To adjust rear toe-in, remove engine and transaxle covers from underside of vehicle. Loosen 2 spring arm bolts. Loosen toe eccentric nut, and turn hexagon screw until rear toe-in is set to specification. See WHEEL ALIGNMENT SPECIFICATIONS . See Figure. Tighten eccentric nut and spring arm bolts to specification. See TORQUE SPECIFICATIONS .
· About lemon-mirror