Specifications Index
BOXSTER SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | AIR CONDITIONING - TECHNICAL DATA | ||
| Torque | AIR CONDITIONER | ||
| Axle Nut/Hub Nut | 340 lb.ft (460 N.m) | ||
| Battery | See "BATTERY SPECIFICATIONS" table under BATTERY | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKES - VEHICLES WITH ABS AND ABS/TC BLEEDING BRAKES - VEHICLE WITH PSM |
||
| Disc Brakes | |||
| Service Specifications | BRAKES, MECHANICAL | ||
| Torque | TIGHTENING TORQUE FOR MECHANICAL BRAKE | ||
| Drum Brakes | |||
| Service Specifications | N/A | ||
| Torque | N/A | ||
| Charging | |||
| Generator | REMOVING AND INSTALLING GENERATOR | ||
| Torque | REMOVING AND INSTALLING GENERATOR | ||
| Drive Belts | |||
| Adjustment | ADJUSTMENTS | ||
| Drive Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | N/A | ||
| Thermostat R & I | N/A | ||
| Water Pump R & I | N/A | ||
| Engine Mechanical | |||
| Compression | ENGINE | ||
| Oil Pressure | Oil pressure should be approx. 5 kg/cm2 at 5000 RPM with an oil temperature of 194°F (90°C). | ||
| Overhaul | GENERAL INFORMATION | ||
| Torque | See appropriate component in ENGINE | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate/Drive Plate Torque | 18 ft.lb (25 N.m) plus additional 90° | ||
| Fuel System | |||
| Pressure Specification | 45-51 psi (3.1-3.5 kg/cm2 ) | ||
| Fuel Pressure Test Procedure | Checking fuel pressure | ||
| Fuel Filter Location | REMOVING AND INSTALLING FUEL PUMP | ||
| Fuel Filter R & I | REMOVING AND INSTALLING FUEL PUMP | ||
| Ignition | |||
| Firing Order & Cylinder Identification | 1-6-2-4-3-5 | ||
| Ignition Wires (Resistance) | N/A | ||
| Ignition Wires (Routing) | N/A | ||
| Spark Plug | |||
| Bosch | FGR 6 KQC | ||
| Beru | 14FGR 6 KQU | ||
| Gap | .026 In. (.70 mm) | ||
| Torque | 22 ft.lb (30 N.m) | ||
| Starting | |||
| Starter | REMOVING AND INSTALLING STARTER | ||
| Torque | INSTALLATION | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT VALUES | ||
| Torque | TIGHTENING TORQUES FOR FRONT AXLE TIGHTENING TORQUES FOR REAR AXLE |
||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 96 ft.lb (130 N.m) | ||