lemon-mirror:
Home >> Renault >> 1983 >> Fuego 1.6 C >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - Turbo >> Testing >> Sensor Insulation Check

Sensor Insulation Check

  1. Disconnect 3-pin connector. See Figure. Turn ignition "OFF". Connect ohmmeter leads first to terminals 5 and 6 and then to terminals 4 and 6.
  2. In both instances, an infinite reading should be indicated. If so, proceed to next check. If not, replace magnetic position sensor.
NOTE: In case of infinite readings, be sure that the ohmmeter probe is properly inserted to touch bottom of terminal.
· About lemon-mirror