All Other Models
Loosen jam nuts by holding axial ball joint with wrench. Turn tie rod sleeves to adjust toe-in to specifications. One turn of sleeve is equal to 1/8" (3 mm) or 1/2°. Tighten jam nuts and recheck toe-in.
CASTER ANGLE SPECIFICATIONS
| Difference Between H2 & H5 | Caster Angle | |||
|---|---|---|---|---|
| Fuego & Fuego Turbo | ||||
| 3/4" (20 mm) | 3° 1/2' | |||
| 1 3/8 (35 mm) | 3° | |||
| 2 5/32" (55 mm) | 2° 1/2' | |||
| 2 3/4" (70 mm) | 2° | |||
| Le Car | ||||
| 1 9/16" (40 mm) | 12 1/2° | |||
| 2 3/8" (60 mm) | 12° | |||
| 3 3/16" (80 mm) | 11 1/2° | |||
| 3 15/16" (100 mm) | 11° | |||
| 4 3/4" (120 mm) | 10 1/2° | |||
| 5 1/2" (140 mm) | 10° | |||
| 18i - Manual Steering (1) | ||||
| 1 3/8" (35 mm) | 2° | |||
| 2 5/32" (55 mm) | 1 1/2° | |||
| 2 3/4" (70 mm) | 1° | |||
| 3 35/64" (90 mm) | 1/2° | |||
|
||||