lemon-mirror:
Home >> Saab >> 1985 >> 900 S, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Turbo >> Testing >> Oxygen Sensor

Oxygen Sensor

  1. Remove 2-pin oxygen sensor connector from wiring harness socket. Connect ohmeter across White leads of oxygen sensor to check resistance of oxygen sensor heating element. Resistance should be about 4 ohms.
  2. Connect voltmeter (set on 2 volt scale) between Black lead of sensor and ground. Start engine. As engine temperature begins to rise, sensor will generate a low voltage signal.
  3. A lean mixture (caused by a small vacuum leak) will generate a voltage reading close to 0 volts. A rich mixture will generate a voltage reading close to 1 volt. Reconnect sensor leads.
· About lemon-mirror