lemon-mirror:
Home >> Saab >> 2003 >> 9-3 Vector, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Disc) >> Torque Specifications >> Disc Brake Torque Specifications

Disc Brake Torque Specifications

WARNING: This page is about a different car, the 2004 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
DISC BRAKE TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Ball Joint Bolt 37 (50)
Battery Bottom Cover Screws (1) 18 (24)
Brake Booster Nuts 15 (20)
Brake Hose-To-Brake Pipes 11 (15)
Brake Hose-To-Caliper Banjo Bolt 30 (40)
Brake Pipe Nuts 12 (16)
Caliper Bleeder Screw 12 (16)
Caliper (Front & Rear) Guide Pins 21 (28)
Engine Mounting Bolts (2) 52 ((3) 70)
Front Caliper Bracket Bolts (1) (2) 155 (210)
Front Hub Driveshaft Nut 170 (230)
Master Cylinder Nuts 18 (24)
Rear Caliper Bracket Bolts (1) (3) 96 (130)
Steering Knuckle-To-Front Hub Bolts (3) 66 (90)
Strut Tower Screws 18 (24)
Vacuum Pump Banjo Bolt 18 (24)
Vacuum Pump Retaining Bolts 18 (24)
Wheel Lug Bolts 81 (110)
INCH (N.m) 
Brake Disc Locking Screws (Front & Rear) 44 (5)
Control Module Bolts 22 (2.5)
Parking Brake Lever Front Nut 115 (13)
TCS/ESP Hydraulic Unit Bracket Bolts 89 (10)
(1) Secure the bolts with Loctite 242 (74-96-268).
(2) Plus an additional 30 degrees. See Fig 1.
(3) Plus an additional 45 degrees. See Fig 1.
Fig 1: View Of Torque Angles
G00215026Courtesy of SAAB-SCANIA OF AMERICA, INC.