lemon-mirror:
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Body & Frame >> Seats >> Repair Instructions >> Memory Seat Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Remove the 3 seat switch bezel screws. Refer to Seat Switch Bezel Replacement .
    2. Fig 1: View Of Underside Of Seat Adjuster Frame & Mounting Nuts
    GM752864Courtesy of GENERAL MOTORS CORP.
  2. Remove 4\ nuts that attach the seat pan to the seat assembly.
  3. Remove the clip from the front outboard seat pan stud. Discard the clip.
  4. Lift the seat pan up in order to allow access to the seat control module retaining screw.
    5. Fig 2: Removing/Installing Seat Module Retaining Screw
    GM752957Courtesy of GENERAL MOTORS CORP.
  5. Remove the seat control module retaining screw.
  6. Disconnect the electrical connectors from the seat control module as necessary.
  7. Remove the seat control module from the seat assembly.
· About lemon-mirror