| Operating Conditions:
Ignition ON/Engine OFF/Radio ON |
| GM Part Number |
Varies |
The scan tool displays the part number. |
| Calibration Part Number 1 |
Varies |
The scan tool displays the primary software part number. |
| Calibration Part Number 2 |
Varies |
The scan tool displays the primary calibration part number |
| Battery Voltage |
Varies |
The scan tool displays volts. This is the voltage input supplied to the Multimedia Player Interface Module. |
| USB Device Detection |
Inactive |
The scan tool displays Active or Inactive. Being active indicates a USB device is connected. |
| Aux IN Detection |
Inactive |
The scan tool displays Active or Inactive. Sensing & Status. This parameter displays active when a device present on AUX In (ministereo plug). |
| USB Overcurrent Protection |
Inactive |
The scan tool displays Active or Inactive. USB over current detection indicates a USB device is drawing too much current and the USB functionality of the device is turned OFF. |
| Bluetooth Device Detection |
Inactive |
The scan tool displays Active or Inactive. Active indicates a Bluetooth device connected. |
| Mute Status |
Mute OFF |
The scan tool displays Mute OFF or Mute ON. This parameter displays the status of the mute. |
| Audio Source Status |
Internal |
The scan tool displays Internal Source, AUX or Bluetooth. This parameter displays the source of the audio. |
| USB Power Status |
Off |
The scan tool displays OFF or ON. This is the status of the USB power. |
| Connected Device Type 1 |
None |
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected. |
| Connected Device Type 2 |
None |
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected. |
| Connected Device Type 3 |
None |
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected. |
| Connected Device Type 4 |
None |
The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected. |
| Bluetooth Signal Strength |
DB |
The scan tool displays the signal strength of the Bluetooth connection. |