lemon-mirror:
Home >> Saab >> 2011 >> 9-3X Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> General Electrical >> Repair Instructions - Control Modules >> DSM >> Fitting

Repair Instructions - Control Modules: DSM: Fitting

IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION .
  1. Plug in the DSM.
  2. Position the DSM.
    Fig 1: Illustration For Step 2
    G05571049Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Fit the clip to the DSM.
  4. Secure the clip fit the DSM.
  5. Fit the upholstery strip to the front edge of the seat base.
    Fig 2: Illustration For Step 5
    G05571050Courtesy of SAAB-SCANIA OF AMERICA, INC.
  6. Fit the front seat cowl.
  7. Fit the FRONT SEAT .

    Perform the procedure for after fitting a control module. See Measures after changing the control module .

· About lemon-mirror