Fuel Gauge
- Disconnect in-line fuel connector located in rear compartment, on driver side. Connect DVOM and Tester (SA9205Z) to terminals "B" and "C". With engine off, turn ignition switch to RUN position.
- Fuel gauge should indicate between full and empty depending on resistance setting. See FUEL GAUGE RESISTANCE table. Test fuel gauge beginning with low resistance setting to high resistance setting.
- If fuel gauge does not operate as specified, replace instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION .
FUEL GAUGE RESISTANCE
| Ohms | Fuel Gauge Reading |
|---|---|
| 43.5 | Full |
| 73 | 3/4 |
| 99 | 1/2 |
| 140 | 1/4 |
| 236 | Empty |