Service Precautions

Observe the following precautions when servicing air bag system:

• Disable air bag system before attempting any repairs to steering column or components. See DISABLING & ACTIVATING AIR BAG SYSTEM .
• After disabling air bag system, Sensing and Diagnostic Module (SDM) retains back-up voltage for about 10 minutes. To avoid accidental air bag deployment, wait at least one minute after disabling air bag system before working on vehicle components.
• Always wear safety glasses when working around air bag system.
• Always carry a live (undeployed) air bag with trim cover facing away from your body. This minimizes chance of injury if air bag accidentally deploys.
• Place a live (undeployed) air bag on a bench or other surface with trim cover facing up, away from surface. This will reduce motion of air bag if it accidentally deploys.
• DO NOT probe air bag inflator module connectors. Air bag may accidentally deploy.
• DO NOT attempt repair of any air bag system components. Replace any faulty components as required.