System Tests: Notes

NOTE: On 2000 models, wiper motor control module is integral to wiper motor. On 2001 models, wiper motor control module was a separate component. When directed to replace wiper motor/control module on 2001 models, replace control module. Retest system and if fault still occurs, replace wiper motor. For wire color, component connector, circuit and terminal identification, see WIRING DIAGRAMS .

SYMPTOM INDEX

Symptom

Perform Test

Front Wiper Motor Inoperative In Any Mode, Washer Inoperative

Front Wiper Motor Inoperative With Switch In High Position Only

Front Wiper Motor Operates In High Speed Only

Wiper Motor Operates In INT Position Only

⁽¹⁾

Wiper Motor Inoperative In MIST Position Only

⁽¹⁾

Wipers Stop, Then Restart After Several Minutes

⁽²⁾

Front Washer Pump Inoperative, Wiper Motor Operates

Rear Wiper Motor Inoperative

Rear Wiper Motor & Washer Pump Inoperative

Rear Washer Pump Inoperative, Rear Wiper Motor Operates Normally

⁽¹⁾	Replace wiper/washer switch.

⁽²⁾	Motor is overheating. Check for mechanical binding.