Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

Pull the control assembly boot down to disengage the boot from the knob.

Fig 1: Disengaging Shift Control Boot From Control Lever Knob

Courtesy of GENERAL MOTORS CORP.

Using a screwdriver, remove the control lever knob retainer. Remove the control lever knob.

Fig 2: Removing & Installing Control Lever Knob Retainer
Courtesy of GENERAL MOTORS CORP.
Pull up on the control boot until the indicator bezel disengages from the console.
Disconnect the indicator bezel electrical connector. Remove the bezel and boot.

Fig 3: Removing & Installing Indicator Bezel Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Disengage the control boot from the indicator bezel from the underside of the bezel. Remove the boot.

Fig 4: Removing & Installing Shift Control Boot
Courtesy of GENERAL MOTORS CORP.