lemon-mirror:
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> External Pages >> Different car >> Section 271 (Shift Lock Control) >> Repair Instructions >> Shift Lock Control Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the SIR System. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Air Bag Restraint Systems. . Pull up on the control boot until the indicator bezel disengages from the console.
    Fig 1: Removing & Installing Shift Control Cable From Control Assembly
    GM893834Courtesy of GENERAL MOTORS CORP.
  2. Remove the console. Refer to Console Replacement .
  3. Using a screwdriver, disconnect the control cable from the control assembly.
  4. Disconnect the electrical connector from the indicator bezel.
  5. Remove the control cable retaining clip.
  6. Press the tabs on the control cable and remove the cable from the control assembly.
  7. Disconnect the control cable from the transaxle range switch lever.
    Fig 2: Removing & Installing Shift Control Cable From Transaxle Range Switch Lever
    GM893827Courtesy of GENERAL MOTORS CORP.
  8. Remove the control cable retaining clip.
  9. Press the 2 tabs on the control cable and remove the cable from the control cable bracket.
  10. Remove the control cable grommet from the dash panel.
  11. Remove the control cable from the vehicle.
    Fig 3: Removing & Installing Shift Control Cable From Vehicle
    GM893234Courtesy of GENERAL MOTORS CORP.
· About lemon-mirror