lemon-mirror:
Home >> Saturn >> 2002 >> L200 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 272 (Body Control System) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Instrument Panel Compartment
    GM896875Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: After replacement of the BCM, programming is required.
  1. Open the I/P compartment door.
  2. Remove the I/P compartment lamp assembly by pulling on the lamp plunger.
  3. Disconnect the lamp wiring harness from the I/P compartment.
    4. Fig 2: Installing Closeout Panel To Right Side Lower I/P
    GM896491Courtesy of GENERAL MOTORS CORP.
  4. Remove the lower closeout panel from the right side of the instrument panel (I/P).
  5. Pull the closeout panel rearward to detach the panel from the retainers.
    6. Fig 3: Removing Retainer From Heater Outlet Assembly On Right Side To Remove Outlet
    GM897891Courtesy of GENERAL MOTORS CORP.
  6. Remove the retainer from the heater outlet assembly on the right side and remove the outlet.
  7. Remove the I/P compartment door. Refer to Door Replacement - Instrument Panel (I/P) Compartment in Instrument Panel, Gages, and Console.
    8. Fig 4: Removing I/P Compartment Bin Fasteners
    GM896832Courtesy of GENERAL MOTORS CORP.
  8. Remove the I/P compartment bin fasteners.
    9. Fig 5: Locating Body Control Module Electrical Connectors
    GM896914Courtesy of GENERAL MOTORS CORP.
  9. Slowly remove the I/P compartment bin, tilting the bin downward, to expose the BCM residing on the top of the I/P compartment.
  10. Remove the BCM module from the I/P compartment by sliding the module out of the attaching slots.
  11. Remove the BCM harness connectors.
· About lemon-mirror