Control Assembly: Removal
- Disable the SIR system. See AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION. Remove the console. See CONSOLE ASSEMBLY .
- Using fascia retainer remover, disconnect shifter cable from control assembly pin. See Figure .
- Remove shifter cable retainer clip and remove cable from control assembly. Disconnect park lock cable assembly from pin on control assembly. See Figure .
- Depress tab on park lock cable and remove cable from control assembly. Remove indicator bulb by rotating the bulb 1/4 turn and pulling out. See Figure .
- Disconnect control assembly electrical connectors. Remove nuts from control assembly. Remove control assembly and replace, if necessary. See Figure .