Control Cable
CAUTION:
Misadjusted shift linkage could cause transaxle clutch and/or band failure.
- Move control assembly into Park position.
- Disconnect control cable from transaxle range switch lever. See Fig 1 .
- Ensure transaxle range switch lever is in Park position by moving lever counterclockwise (away from dash panel) until it clicks and cannot be moved any further.
- Release control cable assembly adjustment lock tab at control cable bracket on rear powertrain mount. Use a screwdriver, awl, or pick to pry up lock tab and lift. See Fig 2 .
- Reconnect control cable end to transaxle range switch lever.
- Depress lock tab on control cable assembly.
- Verify proper operation.