lemon-mirror:
Home >> Saturn >> 2004 >> Ion 1 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the accelerator bracket (2) on the throttle body (1).

    Tighten:  Tighten the accelerator bracket bolts to 10 N.m (89 lb in).

    2. Fig 1: View Of Accelerator Bracket
    GM889862Courtesy of GENERAL MOTORS CORP.
  2. Connect the accelerator control cable to the throttle body and accelerator bracket.
    3. Fig 2: Identifying Accelerator Control Cable
    GM851308Courtesy of GENERAL MOTORS CORP.
  3. Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
· About lemon-mirror