lemon-mirror:
Home >> Saturn >> 2005 >> Ion 1 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the intake air temperature (IAT) sensor harness connector.
    2. Fig 1: View Of IAT Sensor Harness Connector
    GM851290Courtesy of GENERAL MOTORS CORP.
  2. Loosen the air cleaner assembly clamp.
  3. Disconnect the air cleaner assembly clips.
  4. Remove the upper air cleaner cover.
    5. Fig 2: Exploded View Of Air Cleaner Filter
    GM851250Courtesy of GENERAL MOTORS CORP.
  5. Remove the air cleaner filter from the lower air cleaner housing.
  6. Inspect the air cleaner filter for dust, dirt, and water contamination.
  7. Replace as necessary. Refer to Maintenance Schedule in Maintenance and Lubrication.
· About lemon-mirror