lemon-mirror:
Home >> Saturn >> 2005 >> Relay FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> BCM Setup

BCM Setup

  1. To setup a new BCM, navigate to the Module Setup menu in Computer Integrating Systems on the scan tool, select Body Control Module.
  2. Run the BCM Setup, BPP Calibration and Program Key Fobs procedures.
  3. If the BCM fails to accept the program, perform the following steps:
    • Inspect all BCM connections.
    • Verify that the scan tool has the latest software version.
· About lemon-mirror