lemon-mirror:
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Fuel Level Sensor Tabs
GM889989Courtesy of GENERAL MOTORS CORP.
  1. Carefully slide the fuel level sensor into the slots on the fuel pump module bowl.
  2. Secure the retaining tab (2) on the sensor into the slot on the pump module bowl.
  3. Connect the fuel level sensor electrical connector to the pump module.
  4. Install the fuel level sensor wiring harness to the molded-in tab (1) on the pump module bowl.
  5. Install the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
· About lemon-mirror