lemon-mirror:
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction (2 Of 2) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

Fig 1: View Of EVAP Canister Vent Solenoid Valve Electrical Connector
GM1652166Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE
  2. Disconnect the evaporative emission (EVAP) canister harness electrical connector (1) from the fuel tank pressure sensor.
    Fig 2: Identifying Fuel Tank Pressure Sensor
    GM1742792Courtesy of GENERAL MOTORS CORP.
  3. Using a small flat bladed screwdriver, carefully lift and release the fuel tank pressure sensor from the EVAP canister.
· About lemon-mirror