lemon-mirror:
Home >> Saturn >> 2006 >> Ion Red Line >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction (2 Of 2) >> Repair Instructions >> Throttle Body Assembly Replacement >> Installation Procedure

Installation Procedure

Fig 1: View Of Throttle Body & Gasket
GM1339289Courtesy of GENERAL MOTORS CORP.
  1. Inspect the throttle body gasket and replace if necessary.
  2. Install the throttle body to the supercharger.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the throttle body attaching bolts.

    Tighten:  Tighten the throttle body attaching bolts to 10 N.m (89 lb in).

  4. Connect the throttle body control harness connector.
  5. Connect the EVAP purge line.
  6. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Resonator Replacement .
· About lemon-mirror