Installation Procedure
- Install the generator.
Tighten: Tighten the 2 bolts to 35 N.m (25 lb ft).
- Install the wiring harness to the generator.
Tighten: Tighten the 2 nuts to 7 N.m (62 lb in).
- Install the drive belt. Refer to Drive Belt Replacement .
- Connect the battery.
Install the negative connection to the ground terminal.
Tighten: Tighten the nut to 5 N.m (44 lb in).
- For programming procedures, refer to Control Module References .
- Close the hood.
CAUTION:
Refer to Fastener Caution
.