How To Proceed With Troubleshooting

HINT:

Use this procedure to troubleshoot the power door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 
   1. NEXT: GO TO NEXT STEP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
   1. NEXT: GO TO NEXT STEP 
3. PROBLEM SYMPTOMS TABLE (See  PROBLEM SYMPTOMS TABLE  ) 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.
   1. B Go to step   5 
   2. A : GO TO NEXT STEP. 
4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. On-vehicle inspection (see ON-VEHICLE INSPECTION )
   2. Inspection (see INSPECTION )
   3. Terminals of ECU (see TERMINALS OF ECU )
5. ADJUST, REPAIR OR REPLACE 
   1. NEXT: GO TO NEXT STEP 
6. CONFIRMATION TEST 
   1. NEXT: GO TO NEXT STEP 
   2. END