Service Data
Front suspension
SERVICE DATA FOR FRONT SUSPENSION
| Front wheel alignment | Vehicle height | A - B: D - C: |
91 mm (3.58 in.) 19 mm (0.75 in.) |
| Toe-in (total) Rack end length difference |
0°+-11' (0°+-0.19°), 0 +-2 mm (0 +-0.08 in.) 1.5 mm (0.0059 in.) or less |
||
| Wheel angle | Inside wheel | 33°37' (31°37' to 35°37') 33.62° (31.62° to 35.62°) |
|
| Outside wheel: Reference | 29°55' 29.92° |
||
| Camber Right-left error |
-0°39' +-45' (-0.65° +-0.75°) 45' (0.75°) or less |
||
| Caster Right-left error |
1°47' +-45' (1.78° +-0.75°) 45' (0.75°) or less |
||
| Steering axis inclination Right-left error |
10°13' +-45' (10.22° +-0.75°) 45' (0.75°) or less |
||
| Front suspension | Lower ball joint turning torque | 5.0 N*m (51 kgf*cm, 44 in.*lbf) or less | |
A: Ground clearance of front wheel center
B: Ground clearance of lower suspension arm front bolt center
C: Ground clearance of tire rod set bolt center
D: Ground of rear wheel center
Rear suspension
SERVICE DATA FOR REAR SUSPENSION
| Rear wheel alignment | Toe-in (total) | 0°21' +-20' (0.35°+-0.33°), 3.4 +-3.0 mm (0.13 +-0.12 in.) |
| Camber Right-left error |
-0°57' +-45' (-0.95° +-0.75°) 30' (0.5°) or less |