Service Data
Front suspension
FRONT SUSPENSION SERVICE DATA
| Front wheel alignment | Vehicle height | A - B: D - C: |
82 mm (3.22 in.) 12 mm (0.47 in.) |
| Toe-in (total) Rack end length difference |
0° +-11' (0° +-0.19°), 0 +-2 mm (0 +-0.08 in.) 1.5 mm (0.0059 in.) or less |
||
| Wheel angle | Inside wheel | 33°42' (31°42' to 35°42') 33.70°(31.70°to 35.70°) |
|
| Outside wheel: Reference | 30°04' 30.07° |
||
| Camber Right-left error |
-0°34' +-45' (-0.57° +-0.75°) 30' (0.5°) or less |
||
| Caster Right-left error |
1°45' +-45' (1.75° +-0.75°) 30' (0.5°) or less |
||
| Steering axis inclination Right-left error |
10°01' +-45' (10.02° +-0.75°) 30' (0.5°) or less |
||
| Front suspension | Lower ball joint turning torque | .5.0 N*m (51 kgf*cm, 44 in.*lbf) or less | |
A: Ground clearance of lower suspension arm front bolt center
B: Ground clearance of front wheel center
C: Ground clearance of axle beam set bolt center
D: Ground clearance of rear wheel center
Rear suspension
REAR SUSPENSION SERVICE DATA
| Rear wheel alignment | Toe-in (total) | 0°20' +-20' (0.33° +-0.33°, 3.2 +- 3.0 mm, 0.13 +-0.12 in.) |
| Camber Right-left error |
-0°57' +-25' (-0.95° +-0.42°) 45' (0.75°) or less |